1. Clean the surface and your hands before applying the Sidekick LX Skins. Any contaminants on the surface can leave the install bumpy and oils from your hands can damage the adhesive on the Sidekick LX Skins.

2. Place the Sidekick LX Skins face down (so you just see the white backing) and pull the paper backing away slowly making sure the vinyl doesn't come up with it.

3. Align the Sidekick LX Skins over your device before setting it down.
For The Sides align to the buttons, For the LCD hit the jump button to make the LCD light up and align to the LCD and light sensor, The back align to the 4 bumpers and the camera lens.

4. Rub the Sidekick LX Skins down as you roll each piece down gradually so air bubbles aren't created.

5. Remove the transfer tape slowly to making sure it doesn't hang onto the Sidekick LX Skins.

6. Some pieces might not come with transfer tape because it is not necessary for the install or the piece cannot be applied if there is tape on it. You can reuse tape to transfer uncovered pieces to aid your install if necessary.

Diagram Install:

1. Cut in sections

2. Install small left back Sidekick LX Skin

3. Install battery cover Sidekick LX Skin align with 4 small tabs/pegs and camera

4. Install front left side align with buttons press center edge down first then sides then remove transfer tape

5. Install front right side align with buttons press center edge down first then sides then remove transfer tape

6. Install LCD skin align with the light sensor and the display with the LCD backlight on

7. Install the rear LCD skin align with the center tab/peg

8. Press down the phone to make sure that there not any air bubbles it after a day or so the skins will stick even better.

What is a vinyl skin?
They are thin, flexible, self adhering decals used to protect and personalize your device and come in many different colors. The skin comes in three layers: 1, a paper backing for the vinyl skin, 2, the actual vinyl skin, and 3, a transfer tape on top to aid the install while keeping the details of the skin in place.
Vinyl skins are adhesive backed decals. They are flexible and thin, but once applied to your device it will not move, bubble, or peel off and will last the life of your device with regular usage. The product won't damage the surface of your device, and can be removed cleanly if needed. They are all digitally designed and cut for accuracy.

Removal:
Peel the Sidekick LX Skins away VERY slowly so the adhesive stays on the Sidekick LX Skins better. Then use the removed Sidekick LX Skins and pat away residue on your device if necessary (non-chrome colors will not have this problem) it will eventually take it all off fairly quickly leaving the surface completely unharmed.